finally I have time to catch up on printing! used a spool of translucnet filament I had for a year so let’s use it.
Printer Settings:
| Material | Ultimaker Blue PLA Translucent |
| Print time | Front: 8.5 hrs, Back:6.5 hrs (cura was over estimating by +1/4) |
| Base | Brim |
| Layer Height | 0.15mm (equivalent of fast quality in UM2) |
| Shell Thickness | 0.8mm vs. 2.0mm |
| Fill Density | 10% vs. 0% |
| Print speed | 50 |
i could print it as an one piece but I really wanted to see how inside was printed. also this is a test for shell thickness so it was cool to see them side by side. Printing time-wise, not that much difference really.
